DeWalt DCN691 - Page 48

ENGLISH
46
18V XR LI-ION CORDLESS FRAMING NAILER
DCN690, DCN691, DCN692
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
D
EWALT one of the most reliable partners for professional power tool users.
Technical Data
DCN690 DCN691 DCN692
Voltage V
DC
18 18 18
Type 1 1 1
Actuating mode Sequential/ Sequential Sequential/
Bump only Bump
Magazine angle 33° 33° 33°
Fasteners
length mm 50–90 50–90 50–90
shank diameter mm 2.8–3.3 2.8–3.3 2.8–3.3
angle 30–34° 30–34° 30–34°
head geometry clipped or clipped or clipped or
offset round offset round offset round
collation type paper paper paper
Weight
(without battery pack) kg 3.53 3.53 3.53
Drive energy J 105 105 105
L
PA
(sound pressure) dB(A) 84 84 84
K
PA
(sound pressure
uncertainty) dB(A) 3 3 3
L
WA
(sound power) dB(A) 95 95 95
K
WA
(sound power
uncertainty) dB(A) 3 3 3
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
a
h
= m/s² 3.8 3.8 3.8
Uncertainty K = m/s² 1.5 1.5 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications, with
different accessories or poorly maintained,
the vibration emission may differ. This
may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.