DeWalt DCN692 - Register Online; Three Year Limited Warranty

19
ENGLISH
SYMPTOM CAUSE FIX
Jammed nail Wrong size or angle nails Use only the recommended nails. Refer to TechnicalData.
Magazine screws not secured after
previous jam clear/inspection
Make sure to tighten magazine hex bolts with
wrenchprovided.
Damaged or worn driver blade Replace driver blade. See authorised
DEWALT
repairagent.
Material and fastener length If the unit continues to stall (forcing the need to rotate the
Stall release lever) choose the appropriate material and
fastener length that is not too rigorous anapplication.
Debris in nosepiece Clean nose area and watch closely for small pieces of
broken nails stuck in thetrack.
Worn magazine Replace magazine. See authorised
DEWALT
repairagent.
Damaged pusher spring Replace spring. See authorised
DEWALT
repairagent.
Dry fire lock out is engaged with only 7–9
nails remaining in magazine and the user
is applying excessive force to contact trip,
overriding the lockout
Load more nails in magazine to disengage dryfirelockout.
Tool is not yet run‑in New tools can take 500–1000 nails for parts to mesh and
wear in together. Drive shorter nails during this period if
experiencing difficulty driving nailsflush.
Use of incorrectspeed. If trying to drive longer ring shank nails in soft woods, or
driving ring shank nails into harder materials in speed 1‑
adjust speed setting to position2.