DeWalt DCN920 - Register Online; Three-Year Limited Warranty

13
ENGLISH
the packaging, call the local company or see website for
warrantyinformation.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-DeWALT
(1-800-433-9258) for a freereplacement.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will help
you obtain more efficient warranty service in case there is
a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer SafetyAct.
Register online at www.dewalt.com/account-login.
Repairs
The charger and batteries are notserviceable. There are no
serviceable parts inside the charger or batterypack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
brush inspection and replacement, when applicable)
should be performed by a factory service center or
an authorized service center. Always use identical
replacementparts.
1. Remove battery pack from tool and engage trigger safety
lock‑off
2
.
2. Using the hex wrench
12
provided, loosen the two
hex bolts
18
at the top of themagazine
7
and the hex
bolt
19
on the foot of thetool.
3. Lift the magazine
7
away from thenailer.
4. Remove jammed/bent nail, using pliers if necessary. Clear
out any debris in the nail channel ifrequired.
5. Install the magazine back into position under the nose
of the tool and tighten the two hex bolts
18
at the top
of themagazine
7
and the hex bolt
19
on the foot of
thetool.
6. Reinsert batterypack.
NOTE: The tool will disable itself and not reset until the
battery pack has been removed andreinserted.
7. Reinsert nails into magazine (refer to Loading theTool).
8. Release the pusher latch
8
.
9. Disengage the trigger safety lock‑off
2
when ready to
continuenailing.
10. If nails become jammed in the nosepiece frequently,
have the tool serviced by an authorized DeWALT
servicecenter.
Three‑Year Limited Warranty
For warranty terms, go to www.dewalt.com/support/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at DeWALT Industrial Tool Co., 701East
Joppa Road, Towson, MD 21286or call 1-800-4-DeWALT
(1-800-433-9258).
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in