To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCP580 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| No Load Speed | 15, 000 RPM |
| Planing Width | 82 mm |
| Planing Depth | 2 mm |
| Rebating Depth | 9 mm |
| Motor Type | Brushless |
| Blade Length | 82 mm |
| Dust Port | Yes |
| Tool Length | 370 mm |
| Type | Cordless |
Provides essential safety warnings for all power tool operation.
Guidelines for maintaining a safe and clean work environment.
Precautions related to power cords, outlets, and water exposure.
Ensuring operator alertness, protective equipment, and safe handling.
Proper usage, maintenance, and care for power tools.
Safety guidelines for battery tools and general service information.
Specific safety precautions and best practices for using the planer.
Essential safety measures when handling and charging DEWALT battery packs.
Specific warnings and handling procedures for Li-Ion battery packs.
Information on battery recycling programs and the RBRC seal.
Safety guidelines for using DEWALT battery chargers.
Step-by-step guide for charging and understanding charger lights.
Interpreting charge indicators and hot/cold delay features.
Guidelines for charger mounting and important battery pack notes.
Recommendations for charging environment and long-term battery storage.
Identification of the various parts and features of the planer.
Specifies the intended applications for the DEWALT planer.
Instructions and warnings for operating the hand planer safely.
Procedure for inserting and removing the battery pack from the tool.
Understanding the fuel gauge indicators on DEWALT battery packs.
How to operate controls like trigger switch and depth knob.
Proper methods for planing surfaces and achieving smooth finishes.
How to install and use the rabbet fence for specific cuts.
Storing extra blades and removing high-speed steel blades.
Procedure for adjusting HSS blades using the gauge plate.
Instructions for removing, adjusting, and reinstalling carbide blades.
Method for sharpening high-speed steel blades using a holder.
How to use the kickstand and edge chamfer groove.
General blade maintenance and cleaning procedures.
Connecting and using the dust bag or shop vacuum.
Procedures for cleaning the planer and its charger.
Clearing obstructions from the planer's chip discharge chute.
Information on using DEWALT recommended accessories with the tool.
Guidelines for service, repairs, and product registration.
Details of the three-year limited warranty for DEWALT tools.
Warranty specifics for Latin America and free warning label replacement.
