To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCP580B and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Motor Type | Brushless |
| Max Depth of Cut | 1/8 inches |
| No Load Speed | 15, 000 RPM |
| Weight | 6.7 lbs |
| Dust Port | Yes |
| Battery Included | No |
| Charger Included | No |
| Motor Power | 20V |
| Planing Width | 3-1/4 inches |
| Planing Depth | 0-1/8 inches |
| Blade Type | Carbide |
Guidelines for maintaining a safe and clear workspace while operating power tools.
Precautions related to electrical hazards when using power tools.
Measures to ensure operator safety, including alertness, PPE, and proper attire.
Instructions for proper operation, maintenance, and storage of power tools.
Guidelines for safe handling, charging, and maintenance of battery packs.
Warnings regarding chemical exposure from dust and proper ventilation.
Critical safety guidelines for handling, charging, and using DeWalt battery packs.
Best practices for storing battery packs to maintain their longevity.
How to clean the exterior of battery packs safely.
Explanation of the fuel gauge feature on certain battery packs.
Safety warnings and guidelines for transporting battery packs.
Specific instructions for shipping FLEXVOLT battery packs, including using the cap.
Information on battery recycling and the RBRC seal.
Crucial safety precautions for using DeWalt battery chargers.
Step-by-step guide on how to charge the battery pack using the charger.
Explanation of the charger's feature to delay charging for hot or cold battery packs.
Specific details about the DCB118 and DCB1112 charger models.
Overview of the tool's electronic system protecting the battery.
Key points and troubleshooting tips for battery charging.
How to set the desired depth of cut using the adjustment knob.
Instructions and tips for performing planing operations correctly and safely.
Information on installing and using the rabbet fence for precise cuts.
Details on the planer's feature for storing extra blades.
Procedures for removing, adjusting, and reinstalling high-speed steel blades.
Procedures for removing, adjusting, and reinstalling reversible carbide blades.
Instructions for sharpening high-speed steel planer blades.
Information on the planer's built-in kickstand and its functionality.
Using the chamfering groove for planing along wood corners.
Connecting dust bags or vacuums to the dust extraction port.
General guidelines for cleaning the tool and its air vents.
How to clear blockages from the chip discharge chute.
Information on recommended accessories for the power tool.
Guidelines for servicing and repairing the power tool.
Instructions and benefits of registering the product online.
Details regarding the product's limited warranty terms and coverage.
Information on how to obtain replacement warning labels.
