DeWalt DCR027 - Radio Tuning and Audio Playback; DAB Mode Tuning; Tune or Seek Function (FM); Program the Clock

9
ENGLISH
Scan' and select this option by pressing the Enter/Display
button
7
.
2. Press the right arrow button to select the Yesoption.
3. Press the Enter/Display button
7
to perform the
'AutoScan'.
Once 'Auto Scan' is complete the radio will play the first station
itfinds.
Display
Press the Enter/Display Button
7
to alternate between scrolling
text, date and stationinformation.
Station Prune
Some stations once received by your radio which are no longer
available may display with a ? after the stationname.
To remove these stations from the station list, use the
'Prune'function:
Press Menu
10
and scroll right to the 'Prune'option.
1. Press Enter/Display
7
toselect.
Dynamic Range Compression(DRC)
This function reduces the difference between the loudest
and quietest audio being broadcast. Effectively, this makes
quiet sounds comparatively louder, and loud sounds
comparativelyquieter.
The following options are available:
• 0 - broadcast 'DRC' will be ignored
• 1/2 - sets 'DRC' at half the level transmitted
• 1 - uses the 'DRC' level transmitted
• 2 - doubles the 'DRC' level transmitted
NOTE: DRC only works if it is enabled by thebroadcaster.
To Adjust:
1. Press Menu
10
and scroll right to the 'DRC' option.
2. Press Enter/Display
7
to select.
3. Select the desired number displayed on the LCD
11
using
the arrow buttons
5
.
4. Press Enter/Display
7
toconfirm.
Tune or Seek Function (FM)
There are two tuning methods and one seek method for finding
the desiredfrequency.
To tune:
Press and release the right or left arrow button
5
. Repeat until
the desired frequency isfound.
To seek:
Press and hold the right or left arrow button
5
for 2 seconds.
The tuner frequency will change to the first radio station with
acceptable clarity and stop at thatstation.
NOTE: When the charger/radio is paired to a Bluetooth® device
the right and left arrow buttons
5
can be used to skip or go to
previous tracks on the audiodevice.
To Program the Clock
In 'DAB' mode the time/date automatically synchronises
with national time signals. If the time/date does not update
automatically it can be updatedmanually.
To Adjust the Clock Manually:
1. Press the Menu button
10
.
2. Use the arrow buttons
5
to scroll to 'Clock Adjust' on the
LCDdisplay and press the Enter/Display button
7
.
3. Scroll to ''Date & Time' and press the Enter/Display button
7
.
4. Set the date and time using left and right arrowbuttons.
5. Once the desired time is set press the Enter/Display button
tocommit.
Other Clock Adjust menu options:
• Time format: Select a 12h or 24h time display format
• Date format: Select the date display format, MM/DD/YYYY,
YYYY/MM/DD or DD/MM/YYYY.
To Program the Preset/Memory Buttons
Ten 'DAB' and ten 'FM' radio stations may be independently set.
After programming the buttons, pressing 1-2, 3-4, 5-6, 7-8 or
9-10 will instantly change the frequency to the presetstation.
1. Set the radio to desired station (see Tune or SeekFunction).
2. Press and hold one of the desired memory buttons
8
until
the preset number begins flashing in the LCD display
11
.
Release the button and wait for the preset display to
stopflashing.
Each memory button can store two presetstations.
To Store a Second Preset:
1. Manually set the radio to desired station (see Tune or
SeekFunction).
2. Press and hold one of the desired memory buttons until the
preset number begins flashing in the LCDdisplay.
3. Press the preset button a second time so that the next
preset number displays.
4. Release the button and wait for the preset display to
stopflashing.
To Adjust the EQ
Bass and treble can be adjusted by changing the
Equalisation(EQ) settings of theradio.
1. Press the Menu button
10
and use the arrow keys to select
'Sound EQ'.
2. Press the right arrow button to increase the bass or the left
arrow button to decreaseit.
3. Once desired adjustment is achieved, press the
Enter/Display button
7
.
4. Repeat steps 2 and 3 for trebleadjustment.
Playing Audio Through an External
Device (Fig. A)
Audio can be played through the charger/radio via a wireless
Bluetooth® connection to a compatible Bluetooth® device or by
connecting audio device or mobile phone using a 3.5 mm audio
cable to the audio port
15
located inside the device storage
compartment
4
.
Pairing Charger/radio with a Bluetooth® Audio Device
1. Place the charger/radio and the Bluetooth® audio source
within 1m of eachother.
2. Turn charger/radio on by pressing the power button
1
.