What to do if LED lights are flashing on DeWalt Battery Charger?
If the LED lights on the Pressuready® of your DeWalt Battery Charger are flashing indicating a problem, see the PRESSUREADY® Fault Codes Table for the problem. After the problem is solved, clear and reset the fault code.
How to fix battery fault on DeWalt Battery Charger?
If you experience a battery fault with your DeWalt Battery Charger, replace the battery.
How to fix broken o-ring of DeWalt Battery Charger?
If you have a worn or broken o-ring in your DeWalt Battery Charger, check and replace it.
General| Battery Chemistry | Lithium-Ion |
|---|---|
| Charging Ports | 1 |
| Output Voltage | 20V |
| Charging Time | 1 hour |
| Indicator | LED |
| Voltage | 20V |
| Compatible Battery Series | 20V MAX |
| Input Voltage | 120V |
Explains DANGER, WARNING, CAUTION, and NOTICE signal words for hazard severity.
Outlines essential precautions for safe product operation and handling.
Describes potential hazards from spilled fuel and heat expansion.
Provides measures to prevent fire and explosion risks.
Explains risks of high-pressure fluid injection and laceration.
Provides methods to avoid fluid injection injuries.
Describes dangers of inhaling engine exhaust fumes.
Outlines precautions for preventing asphyxiation from exhaust.
Identifies risks associated with unsafe operation.
Provides guidelines for safe product operation.
Describes how high-velocity spray can cause injury.
Lists safety measures to avoid spray-related injuries.
Details risks of fuel/oil leaks during transport and storage.
Provides guidelines for safe transport and storage.
Explains the danger of spraying electrical outlets.
Advises on avoiding electrical shock hazards.
Identifies risks associated with using chemicals.
Advises on safe chemical handling and use.
Describes risks of tyre over-inflation or spray impact.
Provides guidance on tyre inflation and spray distance.
Presents specifications for DEWALT batteries and chargers.
Explains the risk of burns from hot engine components.
Advises on avoiding contact with hot surfaces.
Identifies risks of injury from lifting heavy objects.
Recommends seeking assistance for lifting.
Details electrical safety requirements for DEWALT chargers.
Provides instructions for replacing the mains plug.
Advises on the proper use of extension cables.
Explains the meaning of charger indicator lights.
Describes the charger's feature for managing battery temperature.
Details the tool's protection system for battery packs.
Lists critical safety guidelines for battery packs.
Warns about the fire risk during battery transportation.
States compliance with shipping regulations for DEWALT batteries.
Explains the use and transport modes of FLEXVOLT™™ batteries.
Warns against modifying the unit and specifies intended use.
Emphasizes supervision for children and infirm persons.
Step-by-step guide for assembling the pressure washer.
General instructions for operating the pressure washer.
Explains how to adjust the pressure settings.
Step-by-step guide for applying cleaning solutions.
Emphasizes reading manuals before starting.
Warns about fluid injection hazards during operation.
Steps for connecting the water source.
Guide to installing the battery pack.
Detailed steps for starting the engine in PRESSUREADY® mode.
Steps for starting the engine in manual mode.
Recommendations for storing the engine.
Steps to prevent fuel issues during storage.
Advice on pump maintenance for storage.
Warns against storing the battery pack in the washer.
Addresses problems related to engine starting and fuel.
Diagnoses and resolves pressure, flow, and leak problems.
Solutions for chemical/soap system and filter problems.
Addresses issues from worn or damaged parts.
Explains how to interpret and resolve Pressuready® system fault codes.
To Next Page
