DeWalt DCS355 Instruction Manual

90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
D
EWALT Power Tool, Laser, or Nailer for any reason, you can return
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold
in Latin America. For products sold in Latin America, see country
specific warranty information contained in the packaging, call the
local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
EWALT (1-800-433-
9258) for a free replacement.
Troubleshooting
Problem Possible Cause Possible Solution
Unit will not start. Battery not
installed.
Install battery in tool
handle.
Battery is not
charged.
Place battery on charger
and install a fully charged
battery pack in tool.
Battery or
power tool is
overheated.
Allow battery and/or
tool to cool after
extended use or replace
overheated battery pack
with a cool one.
Switch is
damaged.
Have switch replaced
at an authorized service
center.
English
16

DeWalt DCS355 Specifications

General

Voltage	20V MAX
Oscillations per Minute	0-20, 000 OPM
Tool-Free Accessory Change	Yes
Variable Speed Control	Yes
Power Source	Battery
Oscillation Angle	1.6 degrees
Battery Type	Lithium-Ion