Need help?Do you have a question about the DeWalt DCS573 and is the answer not in the manual?
General| Max Speed | 5500 RPM |
|---|---|
| Bevel Capacity | 57 degrees |
| Power Source | Cordless |
| Depth of Cut at 90 degrees | 2-9/16 in |
| Depth of Cut at 45 degrees | 2 in |
| Battery Type | Lithium-Ion |
| Tool Weight | 7.5 lbs |
Safety for operating environment, electrical hazards, and operator protection.
Proper methods for using and maintaining the power tool.
Safety for battery tools, service, and general saw safety.
Specific safety instructions for cutting and preventing kickback.
Safety for the lower guard, additional saw safety, and chargers.
Specifies intended use, tool markings, and date code.
Instructions for assembly, battery insertion/removal, and fuel gauge.
Procedures for installing, replacing, and caring for saw blades.
Safety and operational checks for the lower blade guard.
Explains kickback and methods to prevent it.
How to adjust cutting depth and bevel angle.
Using indicators, fence, dust extraction, and rafter hook.
Proper support and technique for cutting operations.
Procedures for pocket cuts and dust extraction setup.
Using the rafter hook and general maintenance guidelines.
Adjusting base plate for 90-degree cuts and bevel lever.
Information on blades, accessories, and the Tool Connect Chip.
Guidelines for battery disposal, recycling, and authorized service.
To Next Page
