Need help?Do you have a question about the DeWalt DCS575 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Power Source | Cordless |
| Voltage | 60V |
| Blade Diameter | 7-1/4 in |
| Arbor Size | 5/8 in |
| Motor | Brushless |
| No Load Speed | 5800 RPM |
| Battery Type | Lithium Ion |
| Max Cutting Depth at 90 Degrees | 2-9/16 in |
| Max Cutting Depth at 45 Degrees | 1-7/8 in |
| Bevel Capacity | 0-57 degrees |
| Battery Compatibility | 20V MAX* and 60V MAX* Batteries |
Details on noise and vibration emission levels as per EN60745.
Details for the DCB546 battery pack model.
Explains severity levels for danger, warning, caution, and notice symbols.
Lists essential safety practices for power tool operation and work area.
Guidelines for operator alertness, PPE, preventing unintentional starting, and proper dress.
Instructions on tool usage, maintenance, and storage to ensure safety and longevity.
Safety guidelines for using and caring for battery packs and chargers.
Explains kickback and how to avoid it through proper procedures and conditions.
Safety advice specific to circular saws, including blade guards and blades.
Identifies potential risks that remain despite safety measures.
Explains pictograms found on the tool itself.
Specific safety measures for saws with pendulum blade guards.
Further safety advice for circular saws, including noise and dust.
Detailed explanation of kickback causes and operator prevention methods.
Procedures for safely cleaning the charger.
General safety rules for all battery packs.
Safety guidelines specific to lithium-ion battery packs.
Safety precautions for transporting batteries.
Guidelines for recharging and end-of-life disposal of battery packs.
Best practices for storing battery packs for optimal performance.
Explains pictographs found on chargers and battery packs.
Lists package items and identifies tool components.
Specifies applications and electrical safety precautions.
Instructions for replacing the mains plug in the UK and Ireland.
Step-by-step guide for installing a saw blade.
Step-by-step guide for replacing a saw blade.
Procedures for checking the proper function of the lower blade guard.
Details on blade types, sizes, and teeth for different applications.
Explanation of kickback and its causes.
How to set the correct cutting depth for efficient and safe operation.
Instructions for tightening the depth adjustment lever.
Steps to adjust the saw's bevel angle for angled cuts.
Explanation of the bevel detent feature for common angles.
How to attach and adjust the parallel fence accessory.
Instructions for attaching the dust extraction port.
Guidance on using the guide rail system for precise cuts.
Covers setting saw to guide rail, kerf indicator, and pre-operation checks.
Details on hand position, switching on/off, and LED worklight.
Guidance on supporting the workpiece for safety and control.
Instructions on safe and effective cutting methods.
Steps for performing pocket cuts safely.
How to connect and use dust extraction systems.
Overview of tool maintenance, lubrication, and cleaning procedures.
Checks and servicing for the lower blade guard.
How to align the base plate for accurate 90-degree cuts.
Tips on blade maintenance, selection, and usage.
Warnings and recommendations for using optional accessories.
Guidelines for environmentally responsible disposal of products and batteries.
Information on recharging battery packs and their end-of-life.
To Next Page
