DeWalt DCS570P1 User Manual

If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT
Instruction Manual
Guide D’utilisation
Manual de instrucciones
DCS570
20V Max* 7–1/4" (184 mm) Cordless Circular Saw
Scie circulaire sans fil de 20 V max* 184 mm (7–1/4po.)
Sierra circular inalámbrica de 20 V Máx* 184 mm (7–1/4")
final page size: 8.5 x 5.5 in

DeWalt DCS570P1 Specifications

General

Type	Circular Saw
Blade Diameter	7-1/4 in
Motor	Brushless
Weight	7.5 lbs
Battery	20V MAX
Included Accessories	Blade, Battery, Charger
Voltage	20V
Arbor Size	5/8 in
Power Source	Battery
Battery Included	Yes
Charger Included	Yes
Battery Type	Lithium Ion
Bevel Capacity	57°

Summary

Safety Alert Symbols and Words

General Power Tool Safety Warnings

Personal Safety

General Power Tool Safety Warnings (Continued)

Further Safety Instructions for All Saws

Kickback: Causes and Operator Prevention

Explains kickback causes and how to prevent it.

Further Safety Instructions for All Saws (Continued)

Safety Instructions for All Saws

Hand Safety and Workpiece Support

Crucial advice on keeping hands away from the blade and supporting work.

Safety Instructions for All Saws (Continued)

Blade Depth and Guard Operation

Proper adjustment of blade depth and ensuring lower guard function.

Blade Selection and Washer Use

Safe Tool Handling and Ripping Guidance

Safe handling practices and using guides for ripping operations.

Kickback Prevention Techniques

Grip, Stance, and Blade Binding

Proper grip, stance, and actions for binding blades to prevent kickback.

Kickback Prevention Techniques (Continued)

Restarting Cuts and Blade Engagement

Safe procedures for restarting cuts and managing blade engagement.

Panel Support and Blade Condition

Lever Security and Blind Area Cutting

Cutting Depth Adjustment

Setting Desired Cutting Depth

Material Handling and Blade Care

Bevel Angle Adjustment

Setting the Saw for Bevel Cuts

Workpiece Support and Saw Positioning

Secure Support and Firm Grip

Emphasizes firm support and grip to prevent injury from loss of control.

Correct Sawing Posture and Kickback Avoidance

Illustrates correct posture and workpiece support to prevent kickback.

Cutting Techniques

Proper Shoe Placement and Blade Speed

Handling Saw Stalls and Corrections

Steps to take if the saw stalls during operation.

Cutting Techniques (Continued)

Maintenance and Cleaning

Tool Cleaning Procedures

Maintenance and Cleaning (Continued)

Air Vent Cleaning and Accessory Safety

How to clean air vents and warnings about using accessories.

Repairs and Service

Authorized Repair and Maintenance

Instructions on who should perform repairs and maintenance.

Three Year Limited Warranty

Three Year Limited Warranty (Continued)

Warranty Coverage and Exclusions