EasyManua.ls Logo

DeWalt DCS572 - User Manual

DeWalt DCS572
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DCS572
Final page size: A5 (148mm x 210mm)

Other manuals for DeWalt DCS572

Question and Answer IconNeed help?

Do you have a question about the DeWalt DCS572 and is the answer not in the manual?

DeWalt DCS572 Specifications

General IconGeneral
TypeCircular Saw
Blade Diameter7-1/4 in
MotorBrushless
Power SourceBattery
Voltage20V
Arbor Size5/8 in
Max Cutting Depth at 90 Degrees2-7/16 in
Bevel Capacity57 degrees
Battery Compatibility20V MAX
Max Cut Depth at 90°2-7/16 inches

Summary

184 mm Cordless Circular Saw DCS572

Definitions: Safety Guidelines

Explains the meaning of hazard signal words and symbols used in the manual.

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a safe and clean work environment.

Power Tool Use and Care

Safety Instructions for All Saws

Cutting Procedures

Safety guidelines for performing cutting operations with saws.

Further Safety Instructions for All Saws

Kickback Causes and Related Warnings

Explains kickback phenomena and prevention methods.

Important Safety Instructions for All Battery Chargers

Charger Safety Precautions

Various warnings and advice for safe charger operation and handling.

Important Safety Instructions for All Battery Packs

Battery Pack Safety Precautions

General safety rules for using and handling battery packs.

Battery Pack Safety, Transportation, and Storage

Specific Battery Hazards and Warnings

Details risks like burns, fire, and damage.

Tool Identification and Markings

Tool Description

Lists and describes the main parts of the power tool.

Assembly and Adjustments

Changing Blades

To Install the Blade

Step-by-step guide for fitting a new saw blade.

To Replace the Blade

Instructions for removing and replacing an existing saw blade.

Lower Blade Guard

Checking the Lower Guard

Steps to verify the proper function of the lower blade guard.

Kickback

Depth of Cut Adjustment

Bevel Angle Adjustment

Bevel Angle Adjustment

How to set the saw for angled cuts.

Mounting and Adjusting the Parallel Fence

Setting the Circular Saw to the Guide Rail

Tuning the Anti-Splinter Guard

Proper Hand Position

Workpiece Support and Cutting Techniques

Dust Extraction

Maintenance and Cleaning

Base Plate Adjustments

Related product manuals