Need help?Do you have a question about the DeWalt DE9135 and is the answer not in the manual?
General| Brand | DeWalt |
|---|---|
| Model | DE9135 |
| Category | Battery Charger |
| Language | English |
Provides specifications for the DE9135 charger, including voltage, current, and charging times.
Explains signal words (DANGER, WARNING, CAUTION, NOTICE) and symbols used in safety instructions.
Warns about 230 volts at charging terminals and the risk of shock from conductive objects.
Warns against allowing liquid inside the charger, which could cause electric shock.
Advises charging only DEWALT batteries to prevent bursting and injury.
Advises keeping conductive foreign material away from charger cavities and unplugging when not in use.
Warns against opening damaged battery packs due to electrocution risk.
Warns against using damaged battery packs, crushing, dropping, or piercing them.
Advises placing tools on their side when not in use to prevent tripping or falling hazards.
Provides specific safety instructions for Nickel Cadmium and Nickel Metal Hydride battery packs.
Provides specific safety instructions for Lithium Ion battery packs.
Warns that battery liquid may be flammable if exposed to spark or flame.
Explains the use of the protective battery cap to prevent short circuits.
Emphasizes placing the protective cap on the battery pack before storing or carrying.
Lists the items included in the charger package, excluding battery packs and kitboxes for N-models.
Explains where to find the date code, including the year of manufacture, on the charger housing.
Details the step-by-step process for inserting a battery pack into the charger and the meaning of indicator lights.
Describes the different states of charge indicated by the charger, including charging, fully charged, and errors.
Explains the feature that equalizes battery cells for optimal performance and when to use it.
Describes the delay function that suspends charging until the battery reaches an appropriate temperature.
Notes that battery packs are protected against deep discharging when used in the tool.
Provides advice on the best conditions for storing battery packs and chargers for longevity.
Specifies that the DE9135 charger is designed for 7.2-18V NiCd, NiMH, or Li-Ion batteries.
Ensures charger voltage matches mains supply and discusses double insulation and mains plug replacement.
Provides instructions for safely fitting a new mains plug, specifying wire connections and fuse rating.
Gives guidance on using extension cords, including suitability, conductor size, and length.
States that the charger is not user-serviceable and requires servicing at an authorized center for repairs.
Warns about shock hazard during cleaning and advises using a dry cloth, not water or cleaning solutions.
Instructs on proper disposal of the product and packaging for recycling and environmental protection.
Advises on the proper end-of-life disposal and recycling of battery packs, including NiCd, NiMH, and Li-Ion cells.
To Next Page
