Need help?Do you have a question about the DeWalt DPN9033SM-XJ and is the answer not in the manual?
General| Model | DPN9033SM-XJ |
|---|---|
| Category | Power Tool |
| Power Source | Pneumatic |
| Nail Diameter | 2.8 - 3.3 mm |
| Nail Length | 50 - 90 mm |
| Fastener Type | Nails |
| Operating Pressure | 70 - 120 psi |
| Magazine Angle | 33 degrees |
| Type | Pneumatic Nailer |
Essential safety rules to prevent injuries and ensure safe tool handling.
Steps to prevent unintended firing and ensure safety during use.
Key considerations for operating the pneumatic nailing tools safely and effectively.
Step-by-step guide for safely loading fasteners into the tool.
Instructions for loading nails into DPN64C-XJ, DPN75C-XJ, and DPN90C-XJ models.
Procedure for safely removing fasteners from the tool.
Steps for installing and removing the guide rod for specific models.
How to adjust the tool for desired nail drive depth.
Information on the utility hook and directional exhaust deflector features.
Statement of conformity with relevant European directives and standards.
To Next Page
