english
37
ROTARY LASER DW079
Congratulations!
You have chosen a DeWALT laser. Years of
experience, thorough product development and
innovation make D
eWALT one of the most reliable
partners for professional power tool users.
Technical Data
DW079
Voltage V 9.6, 12, 14.4, 18
Rotary speed min
-1
0–600
Laser class 3R
Protection class IP54
Accuracy mm/m ±0.1
Self-leveling range ° ± 5
Operating temperature °C -5 to +50
Receptacle thread 5/8" x 11
Weight (without battery pack) kg 2.0
Battery pack DE9503
Battery type NiMH
Voltage V 18
Weight kg 1.1
Charger DE9116
Mains voltage V
AC
230
Approx. charging time min 60
Weight kg 0.4
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardoussituationwhich,ifnotavoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardoussituationwhich,ifnot
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardoussituationwhich,ifnot
avoided, may result in minor or
moderate injury.
CAUTION: Usedwithoutthesafetyalert
symbol indicates a potentially hazardous
situationwhich,ifnotavoided,may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DW079
DeWALT declares that these products described
under “technical data” have been designed in
compliance with:
73/23/EEC, 98/37/EEC, 89/336/EEC, EN 60335,
EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN 60825-1 and EN 61010-1.
For more information, please contact DeWALT at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
eWALT.
Horst Grossmann
Vice President Engineering and Product
Development
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
11/2007
To Next Page
Loading...
