19
ENGLISH
ROTARY DRILL DW217/DW221/DW226/
DW236/DW246/DW248
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.
Technical Data
DW217 DW221 DW226 DW236 DW246 DW248
Voltage V 230 230 230 230 230 230
(U.K. & Ireland only) V 230/115 230/115 230/115 230/115 230/115 230/115
Type 5 5 5 5 5 5
Power input W 675/675 701/701 701/701 701/701 701/701 701/701
No load speed min
-1
0-4,000 0-2,500 0-1,200 0-850 0-600 0-600
Maximum drilling range
steel/softwood mm 8/20 10/25 10/30 13/30 13/35 13/35
Chuck spindle thread size UNF 1/2" x 20 1/2"x 20 1/2" x 20 1/2" x 20 1/2" x 20 1/2" x 20
Collar diameter mm - 43 43 43 43 43
Maximum chuck capacity mm 10 10 13 13 13 13
Weight
without side handle kg 1.6 1.7 – – – –
with side handle kg – – 2.0 2.1 2.2 2.2
L
PA
(sound pressure) dB(A) 84 85 84 85 86 84
K
PA
(sound pressure
uncertainty K) dB(A) 3.0 3.0 3.0 3.0 3.0 3.0
L
WA
(sound power) dB(A) 91 93 93 93 92 93
K
WA
(sound power
uncertainty K) dB(A) 3.7 3.0 4.0 4.5 3.0 3.1
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
Drilling into metal
a
hD
=
m/s²
4.6
4.8
≤ 2.5
≤ 2.5
≤ 2.5
≤ 2.5
Uncertainty K = m/s²
1.5
1.5 1.5 1.5 1.5 1.5
Vibration emission value a
h
Screwdriving without Impact
a
h
=
m/s²
2.5
≤ 2.5 2.5
≤ 2.5
≤ 2.5
≤ 2.5
Uncertainty K = m/s² 1.5 1.5 1.5 1.5 1.5 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
To Next Page
Loading...
