2
Kronos Robotics
Dewalt DW618 Super-PID Conversion
Tools Needed For This Project
• Phillips screwdriver
• Flat head screwdriver
• Wire cutters/strippers
• 1/8” Drill bit
• Hot glue gun
Other Items Needed For This Project
• White acrylic paint
• 14 GA extension cord (25 foot)
• Regulated 5v power supply with hookup wire
• Super-PID
Tip
You can get a regulated 5v power source a from your PC via the USB cable or from one of the hard
drive connectors inside your PC. The connector will have four wires.
Yellow = 12V
Black = GND
Black = GND
Red = 5V
You will want to use one of the black wires and the red wire.
The following two links are power supplies that can also be used.
To Next Page
Loading...
