DeWalt DW621 - Page 20

18
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Router
DW621, DW622
DeWALT declares that these products described under Technical
Data are in compliancewith:
2006/42/EC, EN62841-1:2015 + AC:2015; EN62841-2-17:2017.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
workpatterns.
English (original instructions)
ROUTER
DW621, DW622
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the most
reliable partners for professional power toolusers.
Technical Data
DW621‑XE DW621‑QS DW622‑QS
Voltage V
AC
230 23 230
Type 4 4 4
Power intput W 1100 1100 1400
Power output W 620 620 620
No‑load speed min‑1 8000–24000 infinitely variable
Router carriage # columns 2 2 2
Router carriage stroke mm 55 55 55
Revolver depth stop 3‑step, with graduation and fine adjustment
Collet size 1/4", 1/2" 8 mm 8 mm, 12 mm
Cutters diameter, max. mm 36 36 36
Weight kg 3.1 3.1 3.1
Noise values and vibration values (triax vector sum) according to EN62841‑2‑17:
L
PA
(emission sound pressure level) dB(A) 88 88 86.1
L
WA
(sound power level) dB(A) 99 99 97.1
K (uncertainty for the given sound level) dB(A) 2.5 2.5 2.5
Vibration emission value a
h
= m/s
2
5.7 5.7 3.5
Uncertainty K = m/s
2
<1.5 <1.5 <1.5