DeWalt DW625 - User Manual

DW625
Electronic Plunge Cut Router
Toupie électronique à course plongeante
Rebajadora electrónica de columnas
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
e
WALT • www.dewalt.com
Page SIze: 8.5 x 5.5

DeWalt DW625 Specifications

General

Voltage	230 V
Collet Diameter	1/2 inch
Plunge Stroke	80 mm
Tool Weight	5.1 kg
Power Source	Corded Electric
Spindle Lock	Yes
Soft Start	Yes
No Load Speed	8000-20000 RPM

Summary

Safety Guidelines and Precautions

General Power Tool Safety Rules

General safety rules for power tool operation.

Electrical Safety Practices

Rules for safe use of electrical power tools.

Personal Safety Measures

Personal safety precautions during operation.

Power Tool Usage, Care, and Features

Proper Tool Usage Techniques

Correct methods for using power tools.

Router Specific Operational Guidelines

Cutting Safety and Bit Precautions

Precautions related to cutters, bits, and cutting areas.

Operational Safety and Accessory Guidance

Personal Protective Equipment (PPE)

Mandatory use of safety glasses, dust masks, and hearing protection.

Tool Components and Intended Use

Router Intended Applications

Specifies the intended applications for the router.

Electronic Motor Control and Operation

Preparation and Switch Operation

Steps for preparation and operating the tool's switch.

Basic Router Operation Procedures

Technical Data, Controls, and Bit Management

Bit Installation and Removal Guide

Step-by-step guide for installing and removing router bits.

Setting and Adjusting Routing Depth

Depth Stop Bar and Vernier Scale

Setting the Desired Routing Depth

Step-by-step guide for setting the desired routing depth.

Fine Adjustment of Routing Depth

Sequential Depth Setting Procedure

Routing Operation and Feed Direction

General Routing Operations Guide

Understanding Feed Direction Principles

Accessory Use and Tool Maintenance

Routine Tool Maintenance Procedures

General maintenance instructions for the tool.