DeWalt DW725 - User Manual

®
DW725
DW726

Summary

Technical Data

Safety Instructions

General Safety Precautions

Radial Arm Saw Specific Safety

Additional safety rules specific to radial arm saws.

Residual Risks

Assembly and Adjustment Procedures

Legstand and Roller Head Assembly

Saw Table Assembly and Alignment

Procedures for fitting and aligning table components.

Saw Blade Installation and Alignment Checks

Mounting and Aligning the Saw Blade

Instructions for fitting and checking blade alignment.

Arm and Blade Alignment Checks

Arm Parallel to Table & Blade Perpendicularity

Verifying arm/blade alignment to table and fence.

Blade Guard Assembly Mounting and Adjustment

Guard Adjustments and Scale Calibration

Guard Control and Riving Knife Adjustments

Scale Calibration (Rip, Bevel, Mitre)

Calibrating rip, bevel, and mitre scales for accuracy.

Yoke Stop, Spring, and Usage Instructions

General Usage Guidelines

Core operating principles and safety tips.

Operating the Saw

Basic Saw Cuts

Cross-Cutting, Mitre, and Bevel Cuts

Step-by-step guides for basic cut types.

Ripping Operations

Standard, Bevel, and Compound Ripping

Performing various rip cut techniques.

Router Bracket, Routing, Fences, and Traverse Control

Router Bracket Mounting & Routing

Mitre Fences & Traverse Control

Maintenance and Cleaning Procedures

General Maintenance and Lubrication

Adjusting Roller Head Bearings

DeWalt DW725 Specifications