Need help?Do you have a question about the DeWalt DW742 and is the answer not in the manual?
General| Power Source | AC |
|---|---|
| Amperage | 15 A |
| Blade Diameter | 10 inch |
| Arbor Size | 5/8 inch |
| Max Depth of Cut at 90 Degrees | 3-1/8 inch |
| Max Depth of Cut at 45 Degrees | 2-1/4 inch |
| Type | Table Saws |
| Motor | 15 Amp |
| Bevel Range | 0-45 degrees |
General safety rules for operating power tools.
Specific safety guidelines for flip-over saw operation.
Specific safety guidelines for mitre saw operation.
Details the cutting dimensions achievable in mitre saw mode.
Details the cutting dimensions achievable in saw bench mode.
Instructions for replacing the UK/Ireland mains plug.
Guidelines for safely using extension cables with the tool.
Step-by-step instructions for attaching the machine's legs.
Instructions for fitting the under-table guard.
Procedure for flipping the sawhead and table.
Procedure for installing or replacing the saw blade.
How to set the depth limiter for mitre saw operation.
Instructions for setting the mitre angle on the saw.
How to adjust the bevel angle of the saw head.
Procedure to check and adjust blade alignment relative to the fence.
To Next Page
