EasyManuals Logo

DeWalt DW7440RS User Manual

DeWalt DW7440RS
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D
EWALT TOOL, CALL US TOLL FREE AT:
1-800-4-D
EWALT (1-800-433-9258)
DW7440RS Rolling Table Saw Stand
with Folding Legs
WARNING: For your own safety, read the table saw instruction
manual before using any accessory. Failure to heed these warnings
may result in personal injury and serious damage to the table saw
and the accessory. When servicing this tool, use only identical
replacement parts.
This stand is designed for use with table saws only. The DW7440RS
stand has been evaluated by UL for use with the DW744, DW744X
and the DW745 table saws. This stand can be used with other table
saw models but these models have not been evaluated for use with
this stand by UL. If you experience a problem with your D
EWALT
purchase, please call 1-800-4-D
EWALT (1-800-433-9258).
Tools Required
Phillips screwdriver
Socket or wrench set
Contents
Stand Carriage head bolts (2)
Mounting brackets (2) M8 lock nuts (4)
Wheels (2) Rear axle
Rubber bumpers (2) M4 screws (2)
Washers (4) M4 lock nuts (2)
Kickstand assembly M6 screws (4)
Tube plugs (2) M4 hex wrench
Saw mounting hardware: hex head bolts (4), washers (8),
nuts (4), lock washers (4)
General Safety Instructions for Table
Saw Accessories
WARNING: To reduce the risk of personal injury:
ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
Ensure all stand fasteners are securely fastened and that all
stand mechanisms are in proper working order before operating
the table saw.
DO NOT exceed the weight this stand can hold. The DW7440RS
table saw stand is designed to support 150 lbs. (68 kgs.) safely
in a work environment. It is unsafe to climb, sit or stand on the
stand.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: indicates a practice not related to personal injury
which, if not avoided, may result in property damage.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DW7440RS and is the answer not in the manual?

DeWalt DW7440RS Specifications

General IconGeneral
Quantity per pack1 pc(s)

Related product manuals