To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW744X and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Max Cutting Depth at 90 Degrees | 3-1/8 inches |
| Max Cutting Depth at 45 Degrees | 2-1/4 inches |
| Motor Power | 15 Amp |
| Arbor Size | 5/8 inch |
| Max Rip to Right of Blade | 24-1/2 inches |
| Max Rip to Left of Blade | 12 inches |
Defines signal words like DANGER, WARNING, CAUTION, NOTICE for hazard severity.
Essential rules to follow before operating the product to prevent injury.
Proper grounding procedures for cord-connected machines to reduce shock risk.
Explains double insulation features and safe use of polarized plugs.
Key safety instructions for operating the table saw, including guarding and work area.
Safe practices for tool use, extension cords, clothing, and footwear.
Emphasizes wearing certified safety glasses, hearing, and respiratory protection.
Proper maintenance, checking for damaged parts, and switch operation.
Rules to avoid kickback, unintentional starting, and working in dangerous environments.
Rules on throat plate, blades, stalled blades, thrown workpieces, and body position.
Detailed instructions on kickback prevention and use of guarding systems.
Importance and instructions for using a push stick for safe cutting.
Warnings about exposure to chemicals in dust from construction activities.
Precautions for dust exposure, ventilation, and using dust collection systems.
Procedure for unpacking the saw and inspecting parts for damage or missing items.
Illustrates and lists the various parts of the table saw for identification.
Lists the required order of assembly for the table saw.
Step-by-step guide on how to attach or replace the saw blade.
Instructions on how to properly position the riving knife for cuts.
Steps for assembling and removing the throat plate.
Instructions on how to install the rip fence on the table saw.
Procedure for adjusting the rip scale indicator for accuracy.
Instructions for removing and installing the anti-kickback assembly.
Steps for attaching the blade guard assembly for safe operation.
Guidelines for securely mounting the table saw to a workbench.
Important safety checks before connecting the saw to a power source.
How to use the rail lock lever to secure the rip fence.
Instructions on using and retracting the work support extension.
Using the fine adjustment knob for precise fence setting.
Notes on adjusting the rip scale pointer for different blade kerfs.
How to operate the on-off switch and lock it with a padlock.
General warning and instructions for making saw adjustments.
Steps to adjust the rail lock lever mechanism.
Reference to the rip scale adjustment section under Assembly.
Procedure for aligning the blade parallel to the miter slot.
How to adjust the bevel stop and pointer for accurate angle settings.
Instructions for adjusting the miter gauge's stop points.
How to align the fence parallel to the saw blade.
Steps to ensure the riving knife is properly aligned with the saw blade.
Information on using 10" diameter blades and checking body/kerf compatibility.
Information on different blade types, RPM ratings, sharpening, and storage.
Caution against using abrasive wheels or diamond blades.
Guidelines for selecting the correct riving knife thickness for blades.
Explanation of kickback and how to respond if it occurs.
Essential checks to perform before each use of the saw.
How the blade guard assembly operates and locks in place.
Essential safety rules for ripping, including fence use and hand placement.
Guidelines for safely ripping small pieces using push sticks.
Instructions for constructing and using a push block for narrow rip cuts.
How to construct and use a narrow rip auxiliary fence for safety.
Safety precautions for performing bevel ripping operations.
Key safety warnings for crosscutting operations.
Procedure for performing crosscuts at an angle other than 0 degrees.
How to set the miter gauge for angled cuts.
Instructions for combining bevel and miter adjustments.
Safety guidelines for using dado blades and cutting dadoes.
Guidelines for making and using featherboards for workpiece control.
