DeWalt DW802 - Tool Components and Assembly; Attaching Side Handle; Accessories Information; Accessory Selection and Use

ENGLISH
3
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
WARNING: To reduce the risk of injury, read the
instruction manual.
General Power Tool Safety Warnings

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust orfumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to losecontrol.
2) Electrical safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electricshock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed orgrounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electricshock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
English (original instructions)
ANGLE GRINDERS
DW802, DWE4010, DWE4010T, DWE4114, DWE4115
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DW802 DWE4010 DWE4010T DWE4114 DWE4115
Voltage V
AC
B5, IN 220-240 220-240 220-240 220-240 220-240
ZA 230 230 230 230 230
Type 1 15/2 15/2 15 15
Power input W 850 750 750 950 950
Frequency Hz B5, IN 50/60 50/60 50/60 50/60 50/60
ZA 50 50 50 50 50
No-load/rated speed min
-1
11000 11000 11000 12000 12000
Wheel diameter mm 100 115 115 115 125
Grinding wheel thickness mm 6 6 6 6 6
Wheel type 27 27 27 27 27
Spindle diameter M14 M14 M14 M14 M14
Weight kg 1.8 1.8 1.8 1.8 1.8