DeWalt DW920 - Page 29

27
ENGLISH
You have chosen a D E WALT tool. Years of
experience, thorough product development and
innovation make D
E WALT one of the most reliable
partners for professional power tool users.
Technical data
DW920
Voltage V
DC
7.2
Type 1
No-load speed min
-1
0-550
Max. torque Nm 9
Tool holder 6.35 mm hex
Maximum drilling capacity
steel/wood mm 6
Weight (without battery pack) kg 0.8
L
PA
(sound pressure) dB(A) 75
K
PA
(sound pressure uncertainty) dB(A) 3
L
WA
(sound power) dB(A) 83
K
WA
(sound power uncertainty) dB(A) 4.6
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value ah
Drilling into metal
a
h, D
= m/s² < 2.5
Uncertainty K = m/s² 1.5
Vibration emission value ah
Screwdriving without impact
a
h
= m/s² < 2.5
Uncertainty K = m/s² 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING:
● The declared vibration emission level
represents the main applications of the
tool. However, if the tool is used for
different applications, with different
accessories or poorly maintained, the
vibration emission may differ. This may
signifi cantly increase the exposure level
over the total working period.
● An estimation of the level of exposure
to vibration should also take into
account the times when the tool is
switched off or when it is running but
not actually doing the job. This may
signifi cantly reduce the exposure level
over the total working period.
● Identify additional safety measures to
protect the operator from the effects
of vibration, such as: maintain the tool
and the accessories, keep the hands
warm, organisation of work patterns.
Battery pack DE9057 DE9084
Voltage V
DC
7.2 7.2
Battery type NiCd NiMH
Capacity Ah 1.3 2.0
Weight kg 0.3 0.3
Charger DE9116
Mains voltage V
AC
230
Charging time min 60
Weight kg 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
CORDLESS TWO POSITION DRILL/DRIVER
DW920
Congratulations!