DeWalt DW926 - Page 21

21
ENGLISH
CORDLESS DRILL/DRIVER
DW925/DW926/DW907
Congratulations!
You have chosen a DEWALT Power Tool. Years of experience, thorough product development and
innovation make DEWALT one of the most reliable partners for professional Power Tool users.
Technical data
DW925 DW926 DW907
Voltage V 7.2 9.6 12
No-load speed min
-1
0-700 - -
No-load speed
1st gear min
-1
- 0-300 0-350
2nd gear min
-1
- 0-1,100 0-1,200
Max. torque Nm 10 19 20
Chuck capacity mm 10 10 10
Maximum drilling capacity in steel/wood mm 10/19 10/22 10/25
Weight (without battery pack) kg 1.0 1.1 1.1
EC-Declaration of conformity
DW925/DW926/DW907
DEWALT declares that these Power Tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 50260,
EN 55014-2, EN 55014, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
NiCd battery pack DE9057 DE9064 DE9074
Voltage V 7.2 9.6 12
Capacity Ah 1.3 1.3 1.3
Weight kg 0.3 0.4 0.5
NiMH battery pack DE9085 DE9086
Voltage V 9.6 12
Capacity Ah 2.0 2.0
Weight kg 0.4 0.65
Charger DE9107 DE9116 DE9118
DE9108
Mains voltage V
AC
230 230 230
Approx. charging time min 60 60 60
Weight kg 0.4 0.4 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.