DeWalt DW933K - Aluminium (MM); Dw933 K

16 en - 1
ENGLISH
CORDLESS JIGSAW DW933K(2)
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 4
Electrical safety en - 4
Mains plug replacement (U.K. & Ireland only) en - 4
Using an extension cable en - 4
Assembly and adjustment en - 4
Instructions for use en - 5
Maintenance en - 6
Guarantee en - 7
Technical data
DW933K(2)
Voltage V 18.0
No load speed min
-1
0-2,000
Stroke length mm 26
Cutting depth in:
- wood mm 65
- aluminium mm 20
- steel mm 10
Bevel angle range (left and right) 0 - 45°
Weight (without battery pack) kg 2.3
Battery pack DE9095
Voltage V 18.0
Capacity Ah 2.0
Weight kg 1.0
Charger DE9108
Mains voltage V 230
Charge current
normal mode A 2.8
equalise mode mA 120
maintenance mode mA 40
Charging time min 50
Weight kg 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard!
EC-Declaration of conformity
DW933K(2)
DEWALT declares that these Power Tools have been
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 50144,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144:
DW933K(2)
L
pA
(sound pressure) dB(A)* 88
L
WA
(acoustic power) dB(A) 93
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144: