DeWalt DW955(K) - Technical Data; Ec Declaration of Conformity

14 en - 1
ENGLISH
CORDLESS RIGHT ANGLE DRILL
DW955/DW965/DW966
Congratulations!
You have chosen a DEWALT Power Tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional Power Tool users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 4
Electrical safety en - 4
Mains plug replacement (U.K. & Ireland only) en - 4
Using an extension cable en - 4
Assembly and adjustment en - 4
Instructions for use en - 5
Maintenance en - 6
Guarantee en - 7
Technical data
DW955 DW965 DW966
Voltage V 9.6 12 14.4
No load speed
1st gear min
-1
0-400 0-400 0-400
2nd gear min
-1
0-1,100 0-1,200 0-1,250
Chuck capacity mm 10 10 10
Maximum drilling capacity
in steel/wood mm 10/22 10/25 10/28
Weight
(without battery pack) kg 1.3 1.3 1.3
Battery pack DE9061 DE9071 DE9091
Voltage V 9.6 12 14.4
Capacity Ah 2.0 2.0 2.0
Weight kg 0.6 0.7 0.8
Charger DE9107 DE9107 DE9107
Mains voltage V
AC
230 230 230
Charge current
normal mode A 2.8 2.8 2.8
equalise mode mA 120 120 120
maintenance mode mA 40 40 40
Charging time min 60 60 60
Weight kg 0.4 0.4 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard!
EC-Declaration of conformity
DW955/DW965/DW966
DEWALT declares that these Power Tools have been
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 50144,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144: