DeWalt DW983 User Manual

changing accessories, or storing the tool. Such preventative
safety measures reduce the risk of starting the tool accidentally.
¢ Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
¢ When battery pack is not in use, keep it away from other metal
objects like: paper clips, coins, keys, nails, screws, or other
small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may
cause sparks, burns, or a fire.
¢ Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools, with sharp cutting edges are less likely
to bind and are easier to control.
¢ Check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the tools
operation. If damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained tools.
e Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be suitable
for one tool, may create a risk of injury when used on another tool.
ne
Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel may result in a risk of injury.
¢ When servicing a tool, use only identical replacement parts.
Follow instructions in the Maintenance section of this manual.
Use of unauthorized parts or failure to follow Maintenance
Instructions may create a risk of shock or injury.
Specific Safety Rules
¢ Hold tool by insulated gripping surfaces when performing an
operation where the tool may contact hidden wiring. Contact
with a “live” wire will also make exposed metal parts of the tool
‘live” and shock the operator.
¢ Wear ear protectors when hammering for extented periods of
time. Prolonged exposure to high intensity noise can cause
hearing loss. Temporary hearing loss or serious ear drum damage
may result from high sound levels generated by hammer drilling.
———— Safety Rules
Wear safety goggles or other eye protection. Hammering and
drilling operations cause chips to fly. Flying particles can cause
permanent eye damage.
e¢ When working on ladder or on scaffolding be sure to lay the
tool down on its side when not in use. Some tools with large
battery packs will stand upright but may be easily knocked over.
¢ Always use the side handle supplied with the tool. Keep a firm
grip on the tool at all times. Do not attempt to operate this tool
without holding it with both hands.
¢ Hammer bits and tools get hot during operation. Wear gloves
when touching them.
e 4\ CAUTION:DO NOT TOUCH ANY METAL PARTS OF THE TOOL
when drilling or driving into walls, floors or wherever live electrical wires
may be encountered! Hold the tool only by insulated grasping surfaces
to prevent electric shock if you drill or drive into a live wire.
e The label on your tool may include the following symbols.
VS volts
Agee ee amperes
ae hertz
ae watts
as minutes
ae ee alternating current
== See direct current
NOx ts ....NO load speed
LS Class II Construction
See Nese revolutions or reciprocation per minute
© ert earthing terminal
————— safety alert symbol

DeWalt DW983 Specifications

General

Brand	DeWalt
Model	DW983
Category	Power Tool
Language	English