DeWalt DW995 - DEWALT Battery and Charger Systems

ENGLISH
en - 2 19
NiMH & NiCd charger DE9116 DE9116 DE9116 DE9116 DE9116 DE9116
Mains voltage V
AC
230 230 230 230 230 230
Approx. charging time h 1 1 1 1 1 1
Weight kg 0.4 0.4 0.4 0.4 0.4 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard!
EC-Declaration of conformity
DW972/DW995/DW909/DW912/DW914/DW997
DEWALT declares that these Power Tools have been
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 50144,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to EN 50144:
DW972 DW995 DW909
L
pA
(sound pressure) dB(A)* 70 70 88
L
WA
(acoustic power) dB(A) 85 70 101
DW912 DW914 DW997
L
pA
(sound pressure) dB(A)* 88 70 75
L
WA
(acoustic power) dB(A) 101 86 83
* at the operator’s ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
DW972 DW995 DW909 DW912 DW914 DW997
< 2.5 m/s
2
< 2.5 m/s
2
8 m/s
2
8 m/s
2
< 2.5 m/s
2
4.3 m/s
2
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany