DeWalt DWE315 ZA - Product Specific Information; Sanding Paint Safety; Residual Risks and Tool Markings; Package Contents and Product Description

ENGLISH
7
Sanding Paint
WARNING: Observe the applicable
regulations for sanding paint. Pay
special attention to the following:
• Whenever possible, use a vacuum extractor
for dust collection.
• Take special care when sanding paint which
is possibly lead based:
– Do not let children or pregnant women
enter the work area.
– All persons entering the work area should
wear a mask specially designed for
protection against lead paint dust and
fumes.
– Do not eat, drink or smoke in the
work area.
• Dispose of dust particles and any other
removal debris safely.
• Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Contact with a “live”
wire will make exposed metal parts of the tool
“live” and shock the operator.
• Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of personal injury due to flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
DATE CODE POSITION (FIG. 1)
The date code (t), which also includes the year of
manufacture, is printed into the housing.
Example:
2015 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Adaptor for all blades
1 Dust extraction adaptor (DWE315KT)
1 Cutting guide (DWE315KT)
1 31mm x 43mm fastcut wood blade
(DWE315KT)
1 31mm x 43mm wood with nails blade
1 100mm Semicircle blade (DWE315KT)
1 Sanding-pad
25 Assorted sandpaper pieces
1 9.5mm x 43mm wood detail blade
(DWE315KT)
1 3mm carbide grout removal blade
(100mm half moon) (DWE315KT)
1 Rigid scraper blade
1 Hex key
1 Kit box (DWE315KT, DWE315K)
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Variable speed trigger
b. LED Worklight
c. Accessory clamp lever
d. Lock-on button
e. Accessory side mount slots
f. Cut guide block
g. Cut guide arm