DeWalt DWE1622K - User Manual

DWE1622
Taladro de Base Magnética de dos Velocidades
Base Magnética de 2 Velocidades
Two Speed Magnetic Drill Press
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
INSTRUCTION MANUAL
INSTRUÇÕES DE OPERAÇÃO, CENTRO DE SERVIÇOS E CERTIFICADO
DE GARANTIA. ADVERTÊNCIA: LEIA ESTAS INSTRUÇÕES ANTES DE
UTILIZAR O PRODUTO.
¿Dudas? Visítenos en Internet: www.dewalt.com
Dúvidas? Visite-nos na Internet em www.dewalt.com.br
Questions? See us on the World Wide Web at www.dewalt.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
09/18/12
Made correction to Fig 1: Changes B & C callouts

DeWalt DWE1622K Specifications

General

Speed	300/450 RPM
Drill Type	Magnetic Drill Press
Max Cutting Depth	50 mm
Weight	47.6 lbs
Height	14.6 inches
Length	6.5 inches
Toolholder	Weldon

Summary

Safety Guidelines and Warnings

Safety Guideline Definitions

Definitions of signal words (DANGER, WARNING, CAUTION, NOTICE) used in the manual.

General Power Tool Safety Warnings

Essential safety rules for work area, electrical, and personal safety during operation.

Power Tool Use and Care

Personal Safety Rules

Detailed personal safety advice, including dress code and avoiding overreaching.

Specific Safety Rules for Drill Presses

Key safety warnings and guidelines specifically for operating drill presses.

Extension Cords and Dust Precautions

Dust Exposure and Health Hazards

Information on hazardous dusts and measures to reduce exposure and health risks.

Motor, Intended Use, and Assembly

Assembly and Adjustments Overview

Introduction to assembly and adjustment procedures, with safety warnings.

Machine Installation and Feed Handle Assembly

Installing the Machine

Drill Guard and Lubrication System Fitting

Mounting the Drill Guard

Fitting the Lubrication System

Accessories and Chuck Installation

Inserting and Removing Accessories

Speed Settings and Motor Height Adjustment

Setting the Speed

Adjusting the Motor Height

Operation and Overload Protection

Power and Motor Control

How to switch the power and drill motor on and off safely.

Overload Protection

Drilling a Hole

Step-by-step guide for drilling holes, including coolant application and pressure.

Drilling Conditions and Maintenance

Maintenance and Lubrication