12
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Unitwillnot
start.
Cord not
plugged in.
Plug tool into a working outlet.
Circuit fuse is
blown.
Replace circuit fuse. (If the product repeatedly causes the circuit
fuse to blow, discontinue use immediately and have it serviced by an
authorised D
eWALT repair agent.)
Circuit breaker is
tripped.
Reset circuit breaker. (If the product repeatedly causes the circuit
breaker to trip, discontinue use immediately and have it serviced by
an authorised D
eWALT repair agent.)
Cord or switch is
damaged.
Have cord or switch replaced by an authorised DeWALT repair agent.
To Next Page
Loading...
