DeWalt DWF83PL User Manual

INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
e
WALT • www.dewalt.com
DWF83PT
30° Paper Tape Framing Nailer/ Clouese à Charpente de 30° pour ruban de papier/Clavadora Estructural de 30° Para Cinta De Papel
DWF83PL
21° Plastic Collated Framing Nailer/ Clouese à charpentede 21° en plastique/Clavadora Para Moarcos de 21° Con Unión de Plástico
DWF83WW
28° Wireweld Collated Framing Nailer/ Cloueuse à charpente pour clous soudés 28°/Clavadora de estructuras para clavos unidos
con alambre de 28°
(final size: 8.5" x 5.5")

DeWalt DWF83PL Specifications

General

Operating Pressure	70-120 psi
Tool-Free Depth Adjustment	Yes
Tool-Free Jam Release	Yes
Dry Fire Lockout	Yes
Magazine Capacity	30
Dimensions	13.5" x 12.5" x 4.5" (343mm x 318mm x 114mm)
Fastener Type	Framing Nails
Fastener Length	2" to 3-1/4"
Length	13.5 in

Summary

Safety Definitions and Guidelines

Important Safety Instructions

Tool Components Identification

Tool Specifications

Nail Specifications

Tool Operation Preparation

Mode Selection: Sequential vs. Contact Trip

Sequential Trip Mode Operation

Describes how to operate the tool in sequential trip mode, requiring contact tip against work before trigger pull.

Contact Trip Mode Operation

Explains contact trip mode, allowing rapid firing by contacting work surface while trigger is held.

Changing Operating Modes

Provides instructions on how to switch between sequential and contact trip modes.

Loading Fasteners into the Tool

Nail Depth Adjustment

Rafter Hook Functionality

Cold Weather Operation Procedures

Hot Weather Operation Considerations

Tool Maintenance

Clearing Jammed Fasteners

Step-by-step instructions for safely removing jammed nails from the tool's nosepiece.

Daily Maintenance Tasks

Cleaning the Tool

Tool Repairs

Recommended Accessories

Product Registration Online

Troubleshooting Guide Common Problems