DeWalt DWMT70774 - Page 9

9
English
WARNING: AIR SUPPLY AND CONNECTIONS
• Donotuseoxygen,combustiblegases,orbottledgases
as a power source for this tool as the tool may explode,
possibly causing injury.
• Donotusesupplysourceswhichcanpotentiallyexceed
200PSI(13.8bar)astoolmayburst,possiblycausinginjury.
• Theconnectoronthetoolmustnotholdpressure
when air supply is disconnected. If a wrong fitting is used,
the tool can remain charged with air after disconnecting
and thus will be able to after the air line is disconnected
possibly causing injury.
• Alwaysdisconnectairsupply:
1)Beforemakingadjustments;
2)Whenservicingthetool;
3)Whentoolisnotinuse;
4)Whenmovingtoadifferentworkarea,asaccidental
actuation may occur, possibly causing injury.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE