What causes side-port "B" to blow spray towards the clogged side B in my DeWalt Paint Sprayer?
This issue occurs when dried material clogs side-port “A”, causing side-port “B” to blow spray towards the clogged side. To resolve this, soak the side-ports in thinner to clean the clog. Important: Do not poke any opening with hard objects.
What causes air flow restriction in my DeWalt DWMT70778 and how to fix it?
Air flow restriction can occur due to dried material at the fluid nozzle “C”, a loose air nozzle, or air pressure set too high. To resolve this: 1. Remove the air nozzle and wipe off the fluid tip using a cloth soaked in thinner or a soft brush. 2. Fasten the nozzle securely. 3. Reduce the air pressure.
General| Brand | DeWalt |
|---|---|
| Model | DWMT70778 |
| Category | Paint Sprayer |
| Language | English |
Improper operation or maintenance could result in serious injury and property damage.
Read and understand all warnings and operating instructions before using this equipment.
Operators and others must wear ANSI Z87.1 CAN/CSA Z94.3 approved safety glasses.
Operators and others in work area must wear ear protection.
Describes the spray gun body's design for balance, light weight, and precision.
Details the spray gun cup capacity, lid design, and ease of removal.
Explains the function of the material filter in protecting against contaminants and small particles.
Describes how air cap horns allow for two different spray patterns.
Explains how the air volume control knob regulates airflow and reduces overspray.
Details the air inlet size and connection for the air supply.
Explains how the fluid control knob adjusts the amount of material released.
Describes how the pattern control knob adjusts the width of the fan spray.
Notes the presence of a fixed hook for convenient hanging of the spray gun.
Details the recommended air supply hook-up, pressure limits, and hose requirements for optimal performance.
Provides step-by-step instructions for cleaning the spray gun after each use.
Outlines lubrication procedures to ensure effective and high-quality performance of the spray gun.
To Next Page
