DeWalt DWMT70782L - Operating Procedures; Start-up; Shut-down

14
English
OPERATING PROCEDURES
Start-up (Fig. 1, pg. 2)
• Connect the tool to air source with the hose of recommended size.
•Turnontheaircompressorandallowtheairtanktobefilled.
•Settheaircompressorregulatorto90PSI.Thisair
tool operates at a maximum of 90 PSI air pressure.
•Pushthesafety lever forward (1) while depressing the trigger (2)
to start operating the tool.
Shut-down (Fig. 1, pg. 2)
•Releasethetriggerinordertostopthetool.
•Fix/takeawaytheinserttool.
•Whenjobiscompleted,turnofftheaircompressorandstore
the air tool after lubrication. For safety, put the tool on a hanger
or on a soft flat pad when not in use.
•Whenchanginggrindingattachmentsandaccessories,
always disconnect the air supply to avoid injury.
OPERATING INSTRUCTIONS
•To begin operation, grip tool and depress safety throttle
lever while engaging the trigger.
 •Tomountstonesandotheraccessories,usethe
wrenches supplied with the tool. Always disconnect air
supply before changing any accessories.
 • Thegrindershouldbegraduallyappliedtotheworksurface
until the stone or burr becomes worn. Always replace
excessively worn stones or burrs.
 • Makesmoothcontactwiththeworkandavoidany
bumping action or excessive force.
2
1