DeWalt DWMT70783 User Manual

DWMT70783
Straight Grinder
Meuleuse droite
Amoladora recta
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT • www.dewalt.com

DeWalt DWMT70783 Specifications

General

Brand	DeWalt
Model	DWMT70783
Category	Grinder
Language	English

Summary

SPECIFICATIONS

Definitions: Safety Guidelines

Safety Signal Word Definitions

Defines DANGER, WARNING, and CAUTION signal words.

IMPORTANT SAFETY INSTRUCTIONS

RISK OF EXPLOSION OR FIRE

RISK TO BREATHING (ASPHYXIATION)

RISK FROM NOISE

RISK OF INJURY

RISK OF INJURY DUE TO WORKPIECE MOVEMENT OR LOSS OF CONTROL

RISK OF INJURY (CONTINUED)

RISK OF ELECTRIC SHOCK

RISK FROM FLYING OBJECTS

RISK OF CUT OR BURNS

RISK OF ENTANGLEMENT

ADDITIONAL SAFETY INSTRUCTIONS FOR GRINDERS

AIR SUPPLY AND CONNECTIONS SAFETY

FEATURES

Collet and Spindle Assembly

Explains the collet, collet nut, and spindle.

Trigger and Safety Lever

Describes the trigger and safety throttle lever functions.

Ergonomic Body and Grip

Details the tool's body material and ergonomic grip design.

Air Inlet and Exhaust

Identifies the air inlet and exhaust port locations.

Speed Control Screw

Explains the function of the speed control screw.

INSTALLATION

Air Supply Setup and Safety Rules

Covers recommended air supply, pressure, and safety rules.

PREPARATION FOR USE

Proper Use and Work Stations

Guidelines for correct tool usage and safe work positions.

Putting Into Service

Air Supply and Lubrication Requirements

Details air supply, pressure, and mandatory lubrication.

Using A Straight Grinder

General warnings and operating instructions for the grinder.

Using A Straight Grinder Continued

PRE-START CHECKLIST

INSERT TOOL ASSEMBLY

OPERATING PROCEDURES

START-UP and SHUT-DOWN

Step-by-step guide for starting and stopping the tool.

OPERATING INSTRUCTIONS

Key points for operating the tool during use.

MAINTENANCE

Lubrication Guide

Details lubrication requirements and manual procedure.

Maintenance Continued

Storage Instructions

SERVICE INFORMATION

Warranty and Label Replacement

Information on the 3-year warranty and label replacement.

Glossary