To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW400 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 11, 000 rpm |
| Spindle Lock | Yes |
| Spindle Size | 5/8 in |
| Spindle Thread | 5/8 inch - 11 |
| Length | 10.5 inches |
| Wheel Diameter | 4-1/2 inches |
Keep work area clean, well-lit, and free of hazards.
Instructions for safe use of electrical power tools and cords.
Advice on dressing properly, staying alert, and using common sense.
Guidelines for safe operation, maintenance, and care of power tools.
Specific safety precautions for using angle grinders, including guards and accessories.
How to attach the side handle to the tool.
Information on choosing correct guards, backing pads, and flanges.
How to start and stop the tool safely.
Instructions for mounting and removing the protective guard.
Safety advice for individuals in the paint sanding work area.
Techniques for removing rust, scale, paint, and smoothing surfaces.
How to clean the tool, including warnings about solvents.
Information on factory lubrication and periodic relubrication.
When motor brushes need replacement and who should do it.
