DeWalt DW400 - Mounting and Removing Hubbed Wheels; Mounting Non-Hubbed Wheels

Wire Wheels
3" wire cup brush
4 1/2" Sanding Flap Discs
Type 27 guard
hubbed sanding flap disc
Type 27 guard
metal unthreaded
backing flange
non-hubbed sanding flap disc
threaded clamp nut
Type 27 guard
4" wire wheel
Type 27 guard
CAUTION: Type 1 Abrasive and Diamond Cut-Off Wheels may not be used on this tool.
A Type 1 Cut-Off Wheel Guard is not available for the DW400.
English
6