To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DWS520 and is the answer not in the manual?
General| Type | Track Saw |
|---|---|
| Blade Diameter | 165 mm |
| Bevel Capacity | 47° |
| No Load Speed | 1750 - 4000 RPM |
| Depth of Cut at 90° | 59 mm |
| Depth of Cut at 45° | 44 mm |
| Weight | 5.1 kg |
| Arbor Size | 20 mm |
| Power Source | Corded |
| Voltage | 230V |
| Motor Power | 1300 W |
Understand kickback causes and warnings to prevent injuries from sudden saw reactions.
Methods to avoid kickback, including proper grip, support, and blade maintenance.
Verify guard movement, spring return, and clearance before each use.
Proper use and adjustment of the riving knife to prevent kickback.
How to turn the saw on/off and safely replace the saw blade.
Keep cord clear, maintain grip, release switch if blade binds, and use track when ripping.
Steps for plunge cuts using track and anti-kickback knob.
The guarding system is critical for safety; ensure it's functional.
Release switch immediately if blade binds or saw stalls.
Causes like improper support, blade twist, and depth setting leading to kickback.
