To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DWS782-CA and is the answer not in the manual?
General| Type | Sliding Compound Miter Saw |
|---|---|
| Blade Diameter | 12 inches |
| Arbor Size | 1 inch |
| Motor Power | 15 amps |
| Voltage | 120 V |
| No Load Speed | 3, 800 RPM |
| Max Cut Depth at 90 Degrees | 3-5/8 inches |
| Weight | 56 lbs |
| Power Source | Corded Electric |
| Dust Collection | Yes |
| Cutting Capacity at 45 degrees | 2x12 inches |
| Bevel Angle Range | 0-49° Left and Right |
Explains the construction and features of tools with double insulation.
Describes the function and use of polarized plugs to reduce shock risk.
Lists and describes optional accessories designed to enhance saw functionality.
Step-by-step procedure for safely replacing the saw blade.
Covers miter control, bevel lock, bevel stops, and pawls for angle adjustments.
Explains the depth stop, lock down pin, and slide lock lever for cutting operations.
Describes the automatic electric brake function for blade stopping.
Aligning miter/bevel pointers, scales, and stops for precise angle settings.
Ensuring blade is square to table and fence, and adjusting fence for clearance.
Adjusting guard, kerf plates, rail guides, and the miter lock mechanism.
Step-by-step guide for installing and using the provided material clamp.
Guidelines for cutting aluminum, plastic pipe, bowed, and large materials.
Procedure for setting up the saw to cut very wide workpieces.
Procedures for cutting crown molding placed flat on the saw table.
An alternative approach to cutting crown molding without a bevel cut.
Instructions for cutting crown molding positioned between the fence and base.
Outlines the three-year limited warranty and one-year free service.
Covers the 90-day money-back guarantee and free warning label replacement.
Addresses problems with saw not starting, blade speed, and cut quality.
Solutions for inaccurate cuts, vibration, and material pinching.
