To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DWS782 and is the answer not in the manual?
Explains the construction of double insulated tools and their safety implications.
Details the use and purpose of polarized plugs to reduce electric shock risk.
Lists and briefly describes optional accessories like work supports and clamps.
Step-by-step guide on how to safely remove the saw blade from the tool.
Step-by-step guide on how to properly install a new saw blade onto the tool.
Explains how to adjust and lock the miter angle of the saw.
Describes the operation of the saw's trigger switch for power control.
Details how to override common stop angles for miter adjustments.
Explains how to adjust and lock the bevel angle of the saw.
Describes the function to temporarily move past the 0° bevel stop.
Explains how to use levers to bevel past the 45° stops.
Details the function of pawls for cutting crown molding.
Explains how the saw is equipped to set 22.5° bevel angles.
Describes how to lock the saw head firmly to prevent sliding.
Explains how to limit the depth of cut for specific applications.
Details the use of the pin for carrying or storing the saw.
Explains the lever used for maximizing base molding cutting.
Describes the function and behavior of the automatic electric blade brake.
Details how to perform straight and miter crosscuts with the saw.
Step-by-step instructions for installing the provided material clamp.
Instructions for calibrating the miter scale to ensure accurate angle settings.
Details how to align the miter pointer with the miter scale for accurate readings.
Instructions for ensuring the blade is square to the table for precise bevel cuts.
Explains how to set and adjust the bevel pointers for accurate angle indication.
Guides on setting the 45° bevel stops for accurate angled cuts.
Details how to set specific bevel stops for 22.5° or 33.9° angles.
Explains how to adjust fences for clearance and workpiece support during cuts.
Discusses the lower guard's automatic operation and visibility features.
Instructions for adjusting kerf plates for optimal blade fit and cut quality.
Covers checking and adjusting rail guides for smooth saw head movement.
Details how to adjust the miter lock mechanism for secure angle locking.
Specific instructions for cutting tall base molding vertically against the fence.
Details the method for cutting crown molding when laid flat on the saw table.
Presents an alternative technique for cutting crown molding without a bevel cut.
Provides steps for cutting crown molding at an angle between the fence and saw base.
Guides on safely cutting aluminum using appropriate blades and lubricants.
Instructions on correctly positioning bowed material for cutting to avoid pinching.
Details on how to cut round materials like plastic pipe securely.
Explains how to cut material that may not fit under the lower guard.
Describes a special setup for cutting very wide workpieces.
Details the procedure for inspecting and replacing the drive belt.
Explains how to clear dust blockages from the dust duct for proper operation.
Provides instructions for inspecting and replacing carbon brushes.
Guides on how to clean the tool's exterior and air vents safely.
Reiterates warnings and information about using recommended accessories.
Emphasizes using qualified service centers for safety and reliability.
Encourages product registration for warranty service and ownership confirmation.
Explains the complimentary service for one year after purchase.
Outlines the return policy for a full refund within 90 days.
Information on obtaining replacement warning labels for the saw.
Troubleshooting steps for when the saw fails to power on or operate.
Solutions for common issues leading to poor cut quality.
Diagnosing and resolving issues with blade speed.
Addressing causes of excessive vibration during saw operation.
Steps to fix problems with inaccurate miter angle settings.
Solutions for when the material being cut pinches the saw blade.
General
