EasyManuals Logo

DeWalt DWX724 User Manual

DeWalt DWX724
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
E
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258)
Miter Saw Stand with Folding Legs
DWX723/DWX724
This stand is designed for use with most miter saws. If you have
any problem with alignment or mounting, call 1-800-4-D
EWALT
(1-800-433-9258).
WARNING: For your own safety, read the miter saw
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the miter saw and the accessory. When
servicing this tool, use only identical replacement parts.
Carton Contents
1 Miter saw stand (DWX723 or DWX724)
2 Miter saw mounting brackets (DW7231)
2 Work piece support and length stops (DW7232)
1 Hardware bag
Tools Required
Drill with 3/8" (9.5mm) drill bit (Not required for DEWALT Miter
Saws)
Crosshead #2 screwdriver
1/2" (13mm) Wrench
Components (Fig. 1)
WARNING: Never modify the stand or any part of it. Damage or
personal injury could result.
Refer to Figure 1 for Components List.
General Safety Instructions for Miter Saw
Stands
WARNING: To reduce the risk of personal injury:
ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
ALWAYS check the stability of the miter saw stand and the miter
saw attached to it before putting the stand or the saw into use.
DO NOT mount any power tool other than a miter saw to this
stand. Mounting other power tools to this stand could result in
severe personal injury.
DO NOT exceed the weight this stand can hold. The main center
beam of the miter saw stand is designed to support 500 lbs.
(227kg.) safely in a work environment. It is unsafe to climb, sit or
stand on the stand.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DWX724 and is the answer not in the manual?

DeWalt DWX724 Specifications

General IconGeneral
BrandDeWalt
ModelDWX724
CategorySaw
LanguageEnglish

Related product manuals