To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DWX726 and is the answer not in the manual?
General| Type | Miter Saw Stand |
|---|---|
| Adjustable Mounting Rails | Yes |
| Foldable | Yes |
| Wheel Kit Compatible | Yes |
| Adjustable Length | Yes |
| Brand | DeWalt |
| Weight Capacity | 300 lb |
| Color | Yellow |
Lists and labels the main parts of the rolling miter saw/planer stand with reference to Fig. 1.
Defines DANGER, WARNING, CAUTION, NOTICE signal words for hazard identification.
Covers product use, stability, operation, and PPE requirements.
Lists all components and hardware found in the packaging.
Lists the tools needed for assembling the stand.
Steps for unpacking, cleaning, and solvent usage warnings.
Critical safety warnings and location of the hex wrench.
Step-by-step guide to attach the leg extension using screws and washers.
Instructions for attaching wheel/storage foot connectors and wheels.
Steps to attach the handle to the stand, including securing screws.
Instructions for attaching the storage foot to the stand connectors.
Describes the three stand positions: closed, intermediate, and fully extended.
Steps to raise the stand to the intermediate position using lever and handle.
Steps to raise the stand from intermediate to the fully extended position.
Instructions to lower and close the stand from any position.
Guides on inserting and locking the work support arms and pieces.
Steps to install the cord wraps using screws and nuts.
Critical warning regarding stability hazards during tool attachment.
Steps to ensure safety before attaching the tool, like disconnecting power.
Adjusting rails, positioning the tool, and ensuring square mounting.
Instructions for fastening the tool to the rails with bolts and screws.
Specific orientation required for mounting planers.
Using plywood if tool holes do not align with rails, including dimensions.
Hardware specs and stand compatibility with various tools.
Detailed steps for conducting the stability test with a wood block.
How to reposition the tool based on stability test results.
Ensuring all fasteners are tight and mechanisms are functional before use.
Guidelines for safe operation when raising or lowering the stand.
How to adjust height and extend work support arms.
Warnings about tipping hazards and instructions for lowering to storage.
Guidance on the proper position for transporting the stand.
Advises using DEWALT accessories and authorized repair services.
Explains advantages of registering the product, including warranty and safety.
Details of the three-year warranty, free service, and money-back guarantee.
