Do you have a question about the DeWalt DXF2035 and is the answer not in the manual?
| Brand | DeWalt |
|---|---|
| Model | DXF2035 |
| Category | Fan |
| Type | Drum Fan |
| Speeds | 3 |
| Power Source | Corded Electric |
| Voltage | 120V |
| Size | 20 inch |
| Material | Metal |
Essential safety precautions and operational guidelines for using the fan safely and correctly.
Covers shock, hot surfaces, fire hazards, and electrical safety warnings for user protection.
Guidance on proper placement and electrical connection of the fan for optimal performance and safety.
Instructions for activating, deactivating the fan, and adjusting fan tilt angle.
Lists required tools and provides steps for assembling the fan cradle.
Guidelines for safely cleaning the fan, emphasizing disconnection and avoiding water or harsh chemicals.
Information on internal motor bearings being permanently lubricated and not requiring additional lubrication.
Crucial warning against operating the fan if damaged or with grills removed, highlighting safety risks.
Recommendations for storing the fan, suggesting the original carton and proper cord management.
Advice on addressing minor problems and important warnings regarding electrical shock and cord damage during troubleshooting.
Information on proper disposal of products and batteries, encouraging recycling according to local provisions.
Cautionary note regarding the use of non-DEWALT accessories, advising potential hazards.