To Next PageTo Next PageWhat to do if my DeWalt DXF2042 Fan will not run?
If your DeWalt Fan isn't running, there could be a couple of things happening. First, make sure the fan is properly plugged into a working power outlet. If it is, check that the power switch is in the 'ON' position.
General| Brand | DeWalt |
|---|---|
| Model | DXF2042 |
| Speeds | 3 |
| Voltage | 120V |
| Battery Included | No |
| Size | 20 inches |
| Power Source | Corded Electric |
Emphasizes reading all warnings and instructions to prevent injury and electrical shock.
Covers general electrical safety, use of the fan, and cord safety.
Addresses safe placement, outdoor use, and handling of the fan.
Details potential exposure to chemicals known to cause cancer.
Covers shock hazards, grounding, extension cords, and proper outlet use.
Details risks related to hot surfaces, fire hazards, and moving parts.
Table and explanation for selecting appropriate wire gauge for extension cords.
Instructions for assembling the fan cradle and preparing for operation.
Lists common problems, their causes, and solutions for the fan.
Visual guide and list of all parts included with the fan.
