27
ENGLISH
MAINTENANCE - Continued
Fig. 20
0.025 in.
(0.635 mm)
CLEANING AND STORAGE
Cleaning
Use a small brush to clean the outside of the
unit. Do not use strong detergents. Household
cleaners that contain aromatic oils such as pine
and lemon, and solvents such as kerosene, can
damage plastic. Wipe o any moisture with a
soft cloth.
Clean the blades with water. Wipe the blades
with a light machine oil to prevent rust.
WARNING: To avoid serious
personal injury, always stop the
engine and allow it to cool before
cleaning or maintaining the unit.
Storage
• To suspend the attachment from a hook, install
the hanger cap onto the attachment. Make
sure the release button is securely locked
into one of the holes on the hanger cap.
Short-term Storage (1-2 weeks)
1. Store the unit in a horizontal position. If this
is not possible, store the unit vertically with
the engine at the top.
Long-term Storage
1. Remove the fuel cap, tip the unit and drain
the fuel into an approved container. Reinstall
the fuel cap.
2. Start the engine and allow it to run until it
stalls. This ensures that all fuel has been
drained from the carburetor.
WARNING: Store the unit out of
the reach of children. Lock up the
unit to prevent unauthorized use or
damage.
WARNING: Store the unit in a
dry, well-ventilated area. Never store
a fueled unit where fumes may reach
an open ame or spark. Allow the
engine to cool before storing.
To Next Page
Loading...
