2
English
A. Panel assembly
B. Nozzle holder
C. Spray gun
D. Wheel
E. Quick-connect
spray wand
F. Frame
G. Handle assembly
H. High-pressure hose
I. High-pressure pump
J. Motor
K. ON/OFF Switch
L. Pressure Adjustment
Knob
5
For best results, pump oil designed specifically for pressure washers
is recommended, as these contain a rust inhibitor and an anti-foaming
agent. If this oil is not available, an SAE 15W-40 oil may be used.
MODEL
Rated Pressure *
Rated Water Flow *
Max water temp
Electrical Requirements
Electrical Cord
High Pressure Hose
Minimum Amp Source
Presure of Inlet Water
Inlet Water
Soap Consumption Rate
DXPW1500E
1500 psi
1.8 gpm
90 °F/32 °C
120V, 15 A, 60 Hz
35 ft
25 ft. (7.6 m)
15 A
20–100 psi
cold tap (100 °F max)
10% max
* Rated Pressure and Rated Water Flow is within manufacturing
tolerance of (+/- 10%).
In a continued commitment to improve quality, the manufacturer
reserves the right to make component changes, design changes, or
specification changes when necessary and without notice.
FIG. 1
J
C
E
B
D
F
G
H
K
L
A
I
To Next Page
Loading...
