4
ENGLISH
• Heat will expand fuel in 
the tank which could 
result in spillage and 
possible fireexplosion.
• Keep maximum fuel level 
12.7 mm below bottom 
of filler neck to allow 
forexpansion.
• Operating the pressure 
washer in an explosive 
environment could result 
in afire.
• Operate and fuel 
equipment in well-
ventilated areas free from 
obstructions. Equip areas 
with fire extinguisher 
suitable for petrolfires.
• Materials placed against 
or near the pressure 
washer can interfere with 
its proper ventilation 
features causing 
overheating and possible 
ignition of thematerials.
• Never operate pressure 
washer in an area 
containing dry brush 
orweeds.
• Muffler exhaust heat can 
damage painted surfaces, 
melt any material 
sensitive to heat (such 
as siding, plastic, rubber, 
vinyl or the pressure 
hose, itself), and damage 
liveplants.
• Always keep pressure 
washer a minimum 
of 1.2m away from 
surfaces (such as houses, 
automobiles or live 
plants) that could be 
damaged from muffler 
exhaustheat.
• Improperly stored fuel 
could lead to accidental 
ignition. Fuel improperly 
secured could get into the 
hands of children or other 
unqualifiedpersons.
• Store fuel in an approved 
container, in a secure 
location away from 
workarea.
• Use of acids, toxic or 
corrosive chemicals, 
poisons, insecticides, or 
any kind of flammable 
solvent with this product 
could result in serious 
injury ordeath.
• Do not spray 
flammableliquids.
DANGER: RISK TO BREATHING ASPHYXIATION
WHAT CAN HAPPEN HOW TO PREVENT IT
• Breathing exhaust 
fumes will cause serious 
injury or death! Engine 
exhaust contains carbon 
monoxide, an odorless 
and deadlygas.
• Operate pressure washer 
in a well-ventilated 
area. Avoid enclosed 
areas such as garages, 
basements,etc.
• Never operate unit in or 
near a location occupied 
by humans oranimals.
• Some chemical/cleaning 
soaps contain substances 
which could cause injury 
to skin, eyes orlungs.
• Use only chemical/
cleaning soaps specifically 
recommended for 
high pressure washers. 
Follow manufacturers 
recommendations. 
Do not use chlorine 
bleach or any other 
corrosivecompound.
DANGER: RISK OF FLUID INJECTION AND 
LACERATION
WHAT CAN HAPPEN HOW TO PREVENT IT
• Your pressure washer 
operates at fluid pressures 
and velocities high 
enough to penetrate 
human and animal flesh 
which could result in 
amputation or other 
serious injury. Leaks 
caused by loose fittings or 
worn or damaged hoses 
can result in injection 
injuries. DO NOT TREAT 
FLUID INJECTION AS 
A SIMPLE CUT! See a 
physician immediately!
• Inspect the high pressure 
hose regularly. Replace 
the hose immediately if 
it is damaged, worn, has 
melted from contacting 
the engine, or shows any 
signs of cracks, bubbles, 
pinholes, or other 
leakage. Never grasp a 
high pressure hose that is 
leaking ordamaged.
• Never touch, grasp 
or attempt to cover a 
pinhole or similar water 
leak on the high pressure 
hose. The stream of water 
IS under high pressure 
and WILL penetrateskin.
• Never place hands in front 
ofnozzle.
• Direct spray away from 
self andothers.
• Make sure hose and 
fittings are tightened and 
in good condition. Never 
hold onto the hose or 
fittings duringoperation.
• Do not allow hose to 
contactmuffler.
• Never attach or 
remove wand or hose 
fittings while system 
ispressurized.